Barricade tape is brightly colored tape (typically incorporating a two-tone sample of alternating yellow-black or red-white stripes or the words "Warning" or "Hazard" in prominent lettering) that is used to warn or be a magnet for passersby of an area or state of affairs containing a potential hazard. It acts as a minor obstacle to prevent accidental entrance to that space or situation and consequently enhances common safety. Barricade tape can be known as construction tape or barrier tape or in reference to the safety hazard concerned as caution tape, warning tape
, danger tape or hazard tape. When used by a police power, the tape is named police tape.
The tape is often wrapped and affixed as a visible warning sign and demarcation, for example against entering a dangerous space, reminiscent of an industrial or commercial building site, a roadworks construction site or the scene of an accident or a crime (for crime scene preservation), or towards dealing with inoperative machinery or appliances.
Barricade tape is made with durable, resilient, tear-proof plastic materials equivalent to polyethylene, polypropylene, or nylon. It is no less than 2 mm thick and 3 inches wide. However, totally different producers supply completely different sizes and thicknesses of barricade tape. Other frequent sizes of barricade tape are 2, four or 6 inches wide and four or 10 mm thick.
Barricade tape usually has a brilliant background and pre-printed bold warning text. It's also possible to buy plain barricade tape and write a custom message on it. However, care needs to be taken when using customized tape, as barricade tape designs may be required to comply with regulations, such because the Occupational Safety and Health Administration (OSHA) and American National Standards Institute (ANSI) laws (when used for functions topic to regulation by these organizations) in the USA.
Barricade tape is used in accordance with the color specs set by OSHA and ANSI. Barricade tape could also be use primarily as a safety precaution for various industries and procedures.
This is used in development zones to inform folks about ongoing construction and that there are potential hazards within the demarcated area. Development tape usually employs a yellow-black color mixture and incorporates printed text, comparable to "Under Development", "Warning", "Work Zone", and "Keep Out" (amongst others). This type of barrier tape is commonly discovered on the site of renovations, demolition, and minor repairs.
This is used in areas containing a considerable danger. Examples embrace electrocution hazards or areas within which there is a risk of publicity to toxic chemicals. In some regions, the precise color mixture indicates the type of threat. For instance, yellow-black tape could also be used to signal the presence of a physical hazard (e.g., a gap), while magenta-yellow can denote a radiation hazard. This type of barrier tape is commonly used in laboratories, production areas, and industrial zones.
Traffic management device tape
This type of barrier tape, as its name implies is used to control visitors, whether foot visitors or vehicle traffic. Traffic control system tapes are used as momentary traffic signal to redirect visitors throughout parade or every time a road is closed. These are usually brightly colored, both in stable orange or orange-white combination.
Police tape or law enforcement tape
This type of barrier tape is used to isolate, protect and preserve a criminal offense scene. Police tape is used to notify the public that an investigation is on going and that a explicit area is restricted. This is usually seen with a yellow-white, yellow-black or blue-white color combination.
This serves the same function as police tape and hazard tape. Firefighter tape is used to isolate a particular area throughout or after a fire to maintain the public away from fire-related risks (e.g., smoke inhalation, airborne particulate matter, and damaged structures).
Requirements for barricade tape
OSHA and ANSI provide exact specification for barricade tape colors. These are present in OSHA rules 1910.22 and 1910.144 and ANSI Z535.5-2007, Safety Tags and Barricade Tapes (for Non permanent Hazards). Nonetheless, the dimension, thickness, and supplies of the barricade tape are left to the discretion of the manufacturer.
OSHA-specified barricade tape colors
Red / white for Fire Prevention and Protection Equipment.
Black / white for Housekeeping and Aisle Marking
Magenta / yellow for Radiation Hazards
Green / white for Safety and First Aid
Blue / white for Faulty Machinery
Orange / white for Traffic and Caution Warning
Black / yellow for Physical Hazards
ANSI-specified barricade tape colours
Yellow/Black Barricade Tape serves as CAUTION and POTENTIAL HAZARD from:
Excavation less than 1.2 meters (4 feet) in depth
Identification of journey hazards and low hanging objects
Materials storage on site
Red Barrication Tape indicates DANGER and SERIOUS HAZARD from:
Live electrical elements
Scaffold under construction
Around swing radius of equipment with a rotating superstructure
Magenta (Purple)/Yellow Tape denotes DANGER and POSSIBLE RADIATION EXPOSURE
Underground warning tape (customized) warns about:
Digging underground gas-pipeline, electric cable and OFC cable installation
Customized thickness and width are available
Protection from overground work
Red and white tape (top) or yellow and black tape (backside) can both be used to mark hazards under UK health and safety rules
Health and safety laws state that markings needs to be placed round obstacles or dangerous locations. This consists of where any of the following present a risk:
people tripping or falling
individuals or vehicles colliding with objects
These markings should be made up of alternating red and white or yellow and black stripes of equal dimension at a 45 degree angle. Barricade tape can be used to fulfill this requirement as long as the tape fits these requirements and is "commensurate with the size of the obstacle or harmful location in question".